top of page



The P-9000LTF is BendPak's 9,000-lb. offering that simply increases the lifting power of the P-6BF pit lift. No matter what you're working on, BendPak has the capability to lift it. High-stance trucks and SUVs can be easily serviced with the optional arm extension kit and truck adapter set. With this much lifting potential, there's almost no lift point spread or vehicle frame the P-9000LTF can't handle.


Pneumatic lock release: Other brands still utilize older-style spring releases on their pit-lifts. These springs are less effective for low-rise lift styles because they eventually require maintenance. Flush-mounted operations leave the springs invisible most of the time, so it's harder to inspect them unless vehicles are being lifted. Air cylinders are extraordinarily safe and do not require maintenance, just a simple 50 psi charge every once in a while.


Low-profile design: When flush-mounted, the zero-footprint P-9000LTF virtually disappears. This design takes up less space in your shop, permitting easier movement around tight areas.


Rugged steel channel frame: Super-wide frames will handle any size vehicle frame, and the steel bars themselves are power coated throughout a 10-step process that ensures the very best in quality and durability.


Solid rubber lift blocks: No flimsy contact pads that rip and cost you more down the road. Blocks sit squarely on the lift's frame and even add a few more inches to your lift's capability.


Optional arm set: Trucks, SUVs and other long-wheelbase vehicles may require more than the simple rubber blocks to gain adequate clearance over the lift. Our arm kit provides offset lifting and additional height to handle everything that rolls your way.


Detachable ramps: The P-9000LTF pit lift mounts flush against the concrete. If you have the P-9000LT model





   -Lifting capacity:

      9,000 lbs. (4,082 kg)


   -Lifting Height:

      24” (610 mm)


   -Lifting Height + Block:

      27” (686 mm)


   -Overall Lift Platform Length:

      58.5” (1,484 mm)


   -Overall Lift Platform Width:

      24” (610 mm)


   -Overall Length:

      74.4” (1,890 mm)


   -Lowered Height:

      4” (102 mm)


   -Speed of rise:

      55 seconds


   -Standard motor:

      1.5 HP / 208-230 VAC / 60 Hz / 1 Ph


   -Shipping weight:

      1,134-lbs. (514 kg)


   -Shipping dimensions:

      77'' x 40'' x 24'' (1,943 mm x 1,016 mm x 609 mm)





  • Reinforced parallel lifting arms to better support inboard loading
  • Reinforced upper lift platform to better support inboard loading
  • Dual-pump power unit with built in proportioning valve
  • Easily convert fast-lube pits into wheel service work bays
  • Mounts outside the pit rail without interfering with center work area
  • Model P-9000LTF flush-mount model provides recessed drive-over option
  • Heavy duty 1.5 HP electric-hydraulic power unit
  • Electronic push-button controls allow smooth, single-hand operation
  • Automatic multi-position safety locks with air release deliver safe, remote operation
  • Powder-coat finish
  • Durable rubber-topped pad surface and rubber lift blocks provide quick set-up
  • Enhanced adjustable (optional) lifting arms


WARNING: cancer and reproductive harm -

Bendpak P-9000LTF

SKU: 5175155
bottom of page