top of page



The HDS-14X is an ideal four-post lift for commercial shops looking to expand their service abilities. The runways are extended 30" more than the standard-length model to a whopping 229". The extended approach ramps provide a safe, gradual climb, and an ample 70" rise permits most mechanics to stand upright to perform oil changes, exhaust service, wheel service and every other undercarriage activity.


Super-long 229" runways: At 229", there isn't much this lift can't handle in its weight class.  Best of all, smaller vehicles fit too, so this one lift alone might be enough to service every vehicle your customers bring in.


Dual-hub cable sheaves: Dual-hub cable sheaves reduce stress, fatigue and wear across the entire structure of the car lift. Large sheaves improves durability of the entire lift, so this limo style lift utilizes huge, 10.5” diameter cable sheaves within the runway and cross tubes, as well as massive 2.25" diameter sheave axles.


Large base plates: 10"x12" base plates provide solid foundation that wont excessively clutter your space.


Spring-loaded safety locks: Safety locks are one of the most crucial features of a car lift. BendPak locks engage continuously as the lift rises. The HDS-14X offers adjustable safety ladders, permitting fast, simple runway leveling. This is especially useful when compensating for slope.


Secondary lock system: A cable slack detection system acts as a backup lock, catching and stabilizing the lift platforms in the unlikely development of slack in the cables.


Longer approach ramps: Extended approach ramps decrease the drive-on angle of the vehicle, useful for low-riding sports cars that might otherwise get scratched or damaged.


RJ7W rolling bridge jack: An RJ7W 7,000-lb. rolling bridge jack is enough to engage the frame of a 14,000-lb. vehicle and hoist half of it in the air. Rolling bridge jacks are necessary for four-post lift operators looking to maximize their shop capabilities and perform wheel service.






      Lifting Capacity: 14,000 lbs. (6,350 kg)

      Max Capacity / Front Axle: 7,000 lbs. (3,175 kg)

      Max Capacity / Rear Axle: 7,000 lbs. (3,175 kg)



      (A) - Min. Runway Height: 7.5" (191 mm)

      (B) - Max. Rise: 70" (1,778 mm)

      (C) - Max. Lifting Height: 77.5" (1,969 mm)

      Time to Full Rise: 60 seconds


   -Outside Dimensions:

      (D) - Overall Width: 130" (3,302 mm)

      (E) - Outside Length: 243" (6,172 mm)

      (F) - Overall Length: 272" (6,908 mm)

      (G) - Height of Columns: 92" (2,337 mm)


   -Inside Dimensions:

      (H) - Width Between Columns: 120" (3,048 mm)

      (I) - Drive-Thru Clearance: 98" (2,489 mm)



      (J) - Runway Width: 20" (508 mm)

      (K) - Length of Runways: 227.5" (5,778 mm)

      (L) - Width Between Runways: 34.5" (876 mm) or 41.5" (1,054 mm)

      (M) - Runway Centerline: 57.5" (1,461 mm) or 64.5" (1,638 mm)

      (N) - Outside Edge of Runways: 77.5" (1,969 mm) or 84.5" (2,146 mm)


   -Minimum Wheelbase

      Rated Capacity: 170" (4,318 mm)

      75% Capacity: 145" (3,683 mm)

      50% Capacity: 120" (3,048 mm)

      25% Capacity: 95" (2,413 mm)



      Locking Positions: 15

      Lock Spacing: Every 4" (102 mm)


   -Power Unit:

      Motor: 220 VAC / 60 Hz / 1 Ph

      Noise: 45 dB



      Weight: 2,740 lbs. (1,242 kg)

      Dimensions: 239'' x 22'' x 29'' (6,070 mm x 558 mm x 737 mm)


Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.





  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Mid to long-style approach ramps for low ground clearance vehicles
  • Runways include rail-kit for optional accessories
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks and sheaves
  • Internal anti-sway slider blocks in each column
  • Pneumatic push-button safety release
  • Features heavy-duty ½" aircraft cable
  • Safety locks enclosed in columns minimize pinch points
  • Oversized self-lubricating cable rollers
  • Rugged 1.75" roller axles
  • Approach ramps incorporate built-in rear-wheel chocks
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional 7,000-lb. capacity rolling jack available (Model RJ7W)
  • ETL approved



WARNING: Cancer and reproductive harm -

Bendpak HDS-14X

SKU: 5175173
bottom of page