top of page

Description:

 

The HD-9 offers our largest variety in any BendPak four-post lift weight class because most vehicles serviced by most shops weigh less than 9,000 lbs. If you need to lift heavier vehicles, we have larger-capacity models that keep you covered. For many of you, however, the HD-9 Series will hit the sweet spot for powerful lifting, compact design and product value. Browse our 9K section to see all of what you can get on these models.

 

Dual-hub cable sheaves: Dual-hub cable sheaves are more expensive to manufacture, but we'd rather send you home with a quality product than a cheap one. They’re necessary to prevent axles, sheaves and cables from burning out before they should.

 

Multi-level locking positions: Safely lock your four-post lift at varied heights, so you’re never crouching or reaching uncomfortably to perform auto maintenance. If you’re raising the lift for parking purposes, that variation is going to come in handy, depending on how you stack your vehicles.

 

Heavy-duty aircraft cable: Each four-post lift comes with four lifting cables made from superior-grade stainless steel. Each individual cable is rated to handle 14,400 lbs. This makes their combined rating over 640% of the total capacity.

 

Large base plates: 10" x 12" base plates keep your car lift rooted in place for as long as you own it. Make sure the ground is level and you’re good to go!

 

Caster kit:  Included 4-piece caster kit that turns your stationary lift into a mobile parking and service station. You can even leave a car on top while you move it!

 

Low-deck runways: Low 4.5" runways, so low-stance chassis can be comfortably driven onto the lift.

 

Automatic safety locks: Four locks engage simultaneously as the lift is raised, and a backup locking system catches cable slack in the unlikely event of cable failure.

 

 

Specifications:

 

    -Capacity:

       Lifting Capacity: 9,000 lbs. (4,082 kg)

       Max Capacity / Front Axle: 4,500 lbs. (2,041 kg)

       Max Capacity / Rear Axle: 4,500 lbs. (2,041 kg)

 

   -Rise:

      (A) - Min. Runway Height: 5" (127 mm)

      (B) - Max. Rise: 70" (1,778 mm)

      (C) - Max. Lifting Height: 75" (1,905 mm)

      Time to Full Rise: 45 seconds

 

   -Outside Dimensions:

      (D) - Overall Width: 110.25" (2,800 mm)

      (E) - Outside Length: 174" (4,420 mm)

      (F) - Overall Length: 200.5" (5,093 mm)

      (G) - Height of Columns: 88" (2,235 mm)

 

   -Inside Dimensions:

      (H) - Width Between Columns: 100.25" (2,546 mm)

      (I) - Drive-Thru Clearance: 86.5" (2,197 mm)

 

   -Runways:

      (J) - Runway Width: 19" (483 mm)

      (K) - Length of Runways: 158.25" (4,020 mm)

      (L) - Width Between Runways: 35" (889 mm) or 41" (1,041 mm)

      (M) - Runway Centerline: 56.75" (1,441 mm) or 63" (1,600 mm)

      (N) - Outside Edge of Runways: 75.75" (1,924 mm) or 82" (2,083 mm)

 

   -Minimum Wheelbase:

      Rated Capacity: 115" (2,921 mm)

      75% Capacity: 100" (2,540 mm)

      50% Capacity: 85" (2,159 mm)

      25% Capacity: 70" (1,778 mm)

 

   -Locking:

      Locking Positions: 14

 

   -Lock Spacing:

      Every 4" (102 mm)

 

   -Power Unit:

      Motor: 220 VAC / 60 Hz / 1 Ph

      Noise: 45 dB

 

   -Shipping:

      Weight: 1,616-lbs. (733 kg)

      Dimensions: 166'' x 22'' x 28'' (4,216 mm x 559 mm x 711 mm)

 

 

Features:

  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Runways accommodate narrow and standard vehicles
  • Runways include rail-kit for optional accessories
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks and sheaves
  • Internal anti-sway slider blocks in each column
  • Oversized self-lubricating cable rollers
  • Features heavy-duty 3/8" aircraft cable
  • Rugged 1.25" roller axles
  • Multi-position safety locks in each column
  • Adjustable lock ladders
  • Push-button pneumatic safety release
  • Independent backup slack-cable safety latches
  • Customizable power unit location
  • Removable approach ramps for additional drive-under clearance
  • Longer approach ramps for low-ground clearance vehicles
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional solid deck available to increase storage capacity
  • Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ45LP or RJ45W)
  • ETL Approved

 

 

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov

 

Bendpak HD-9

SKU: 5175861
$4,995.00Price
bottom of page