top of page



The HD-7W,  ideal for those that want the versatility to park sports cars, sedans, light-duty trucks and SUVs in the same structure. Due to its reduced footprint and ability to house a variety of vehicles in a low-ceiling garage, the HD-7W is an attractive parking and maintenance solution for both homeowners and professional technicians.


Dependable design:  4 stainless steel wire ropes and a lone hydraulic cylinder that remains tucked underneath the runway.


Dual-hub wire rope sheaves: Larger wire rope sheaves prevent undue wear-and-tear on the lift's axles, wire rope and the sheaves themselves. Dual-hub and oversized sheaves provide a safer product that lasts longer.


Multi-level locking positions: Every few inches, the columns  automatically lock into place; simply lower the runways onto the lock as they move over it. Push-button controls release all four locks together.


Secondary safety locks: A secondary lock system acts as a slack-cable device that catches the runways and keeps your vehicle level in case any dangerous cable slack develops. Lift will not be operational until issue is resolved.


Heavy-duty aircraft wire rope: Stainless steel wire ropes rated at 14,400 lbs. each with more than 822% of the entire lift’s maximum lifting capacity. All wire rope fully enclosed within the lift.


Electric-hydraulic power system: Power unit incorporated into the four-post lift structure. Dependable, long-lasting and extremely safe, it's always close at hand for your convenience.


Large base plates: 10" x 12" base plates provide a stable yet minimal footprint.


Caster kit: A 4-piece caster kit makes your lift mobile with or without a vehicle raised on the runways.


Integrated design: For safety, convenience, and aesthetics, the critical lifting components (e.g., airlines, safety latches and wire rope sheaves) are all fully enclosed within the lifts columns.


Low-deck runways: Low-profile, 4.5" high runways result in a safer, easier approach.


Longer approach ramps: Extended-length approach ramps permit drivers to load vehicles onto runways without scratching the front ends of low-riding cars.






      Lifting Capacity: 7,000 lbs. (3,175 kg)

      Max Capacity / Front Axle: 3,500 lbs. (1,588 kg)

      Max Capacity / Rear Axle: 3,500 lbs. (1,588 kg)



      (A) - Min. Runway Height: 5" (127 mm)

      (B) - Max. Rise: 82" (2,083 mm)

      (C) - Max. Lifting Height: 86.5" (2,197 mm)

      Time to Full Rise: 35 seconds


   -Outside Dimensions:

      (D) - Overall Width: 110.25" (2,800 mm)

      (E) - Outside Length: 174" (4,420 mm)

      (F) - Overall Length: 200.5" (5,093 mm)

      (G) - Height of Columns: 100" (2,540 mm)


   -Inside Dimensions:

      (H) - Width Between Columns: 100.25" (2,546 mm)

      (I) - Drive-Thru Clearance: 86.5" (2,197 mm)



      (J) - Runway Width: 19" (483 mm)

      (K) - Length of Runways: 158.25" (4,020 mm)

      (L) - Width Between Runways: 35" (889 mm) or 41" (1,041 mm)

      (M) - Runway Centerline: 56.75" (1,441 mm) or 63" (1,600 mm)

      (N) - Outside Edge of Runways: 75.75" (1,924 mm) or 82" (2,083 mm)


   -Minimum Wheelbase:

      Rated Capacity: 115" (2,921 mm)

      75% Capacity: 100" (2,540 mm)

      50% Capacity: 85" (2,159 mm)

      25% Capacity: 70" (1,778 mm)



      Locking Positions: 17

      Lock Spacing: Every 4" (102 mm)


   -Power Unit:

      Motor: 220 VAC / 60 Hz / 1 Ph

      Noise: 45 dB



      Weight: 1,756-lbs. (796 kg)

     Dimensions: 167'' x 22'' x 28'' (4,242 mm x 559 mm x 711 mm)


Note: Air supply (minimum: 30 psi / 3 CFM) required for safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.





  • Runways include rail-kit for optional accessories
  • Rugged 1.25" roller axles
  • Ramps feature non-skid surface
  • Push-button pneumatic safety release
  • Optional 4,500-lb. capacity rolling jack available (Model RJ-45LP or RJ-45W)



WARNING: Cancer and reproductive harm -

Bendpak HD-7W

SKU: 5175120
bottom of page