top of page



The HD-14T offers superior lifting power with an extended 82” rise. Commercial fleets of trucks and vans will be right at home in your service bayl. accommodate a wider variety than the competition, no matter what vehicles they bring in.


Extended runways: Runways long enough to handle large trucks and SUVs.


Dual-hub cable sheaves: 10.5” diameter sheaves and 2.25” diameter sheave axles, kept within the runway and cross tubes.


Heavy-duty aircraft cable: Four, ½” diameter, 6 x 25 stainless-steel lifting cables that have an incredible breaking strength of over 14,000 lbs. each.


Built-in lubrication: Grease fittings on the sheaves and sheave axles ensure proper lubrication.


Flow restrictor: Integrated flow restrictor ensures a slow, controlled descent in the rare case of hydraulic hose failure.


Spring-loaded safety locks: Automatic locks activate as the runways rise. Adjustable safety ladders make sure the ramps are level.


Push-button pneumatic lock release: A pneumatic (air-powered) lock release lets operators lower the lift with ease.


Secondary lock system: Backup slack-cable detection system comes standard on all Bendpak Lifts.


Integrated design: Hidden internal components keep them protected from environmental damage, as well as human interference.


Adjustable height locking positions: Fully adjustable, multiple lock positions, work at the height most convenient for you.


Electric-hydraulic power system: A dependable, zero-maintenance system keeps all controls right at your fingertips.


Longer approach ramps: Longer the approach ramp, the easier it is to load low-stance cars.


Flexible protective conduit: ALI-certified cable tubing protects against electric shocks. It also prevents wear and tear that occurs over time.


Rolling bridge jacks: We recommend the RJ7W rolling bridge jack so you can perform wheel service on your lift.






      -Lifting Capacity: 14,000 lbs. (6,350 kg)

      -Max Capacity / Front Axle: 7,000 lbs. (3,175 kg)

      -Max Capacity / Rear Axle: Max Capacity / Rear Axle



      (A) - Min. Runway Height: 7.5" (191 mm)

      (B) - Max. Rise: 82" (2,083 mm)

      (C) - Max. Lifting Height: 89" (2,261 mm)

      Time to Full Rise: 65 seconds


   -Outside Dimensions:

      (D) - Overall Width: 126" (3,200 mm)

      (E) - Outside Length: 205" (5,207 mm)

      (F) - Overall Length: 233.25" (5,924 mm)

      (G) - Height of Columns: 100" (2,540 mm)


   -Inside Dimensions:

      (H) - Width Between Columns: 115.75" (2,940 mm)

      (I) - Drive-Thru Clearance: 98" (2,489 mm)



      (J) - Runway Width: 20" (508 mm)

      (K) - Length of Runways: 190" (4,826 mm)

      (L) - Width Between Runways: 34.5" (876 mm) or 41.5" (1,054 mm)

      (M) - Runway Centerline: 57.5" (1,461 mm) or 64.5" (1,638 mm)

      (N) - Outside Edge of Runways: 77.5" (1,969 mm) or 84.5" (2,146 mm)


   -Minimum Wheelbase:

      Rated Capacity: 135" (3,429 mm)

      75% Capacity: 115" (2,921 mm)

      50% Capacity: 100" (2,540 mm)

      25% Capacity: 80" (2,032 mm)



      Locking Positions: 17

      Lock Spacing: Every 4" (102 mm)


   -Power Unit:

      Motor: 220 VAC / 60 Hz / 1 Ph

      Noise: 45 dB



      Weight: 2,408 lbs. (1,092 kg)

      Dimensions: 204'' x 22'' x 30'' (5,182 mm x 584 mm x 762 mm)


Note: An air supply (minimum: 30 psi / 3 CFM) is required for safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.



WARNING: Cancer and reproductive harm -






























































Bendpak HD-14T

SKU: 5175004
bottom of page