top of page

Description:

 

The 10AP Series offers the convenience of wide or narrow installation wrapped up into one configurable package. This durable, safe, and reliable car lift features an expandable top beam and Bi-Metric arms to suit virtually every vehicle lifting requirement – symmetric or asymmetric.

 

AUTOMATIC ARM RESTRAINT SYSTEM PREVENTS UNPLANNED MOVEMENT (ASARS): 10AP has been bolstered to withstand elevated pushing and pulling forces that occur when vehicles are being serviced. Swing arm restraints have been used for decades on two-post lifts to minimize the chance of arms shifting during vehicle loading and service.

 

Until now, these systems had a difficult time withstanding the excessive forces applied to them when vehicles suddenly and unexpectedly shifted on the support pads or adapters of the far-reaching swing arms; typically due to improper loading or when heavy drivetrain components are added or removed from elevated vehicles causing an unanticipated transference in the center of balance.

 

With a full 360-degrees of load holding grip, the heavily forged-steel design of this patented and very exclusive arm restraint system secures the lift arms firmly in place with over 2000-pounds of load-holding force, preventing unplanned swing arm movement during lift use and vehicle service operations. This revolutionary design is an adaptive system that requires minimal operator involvement and delivers unparalleled holding power. A distinctive power-hold design that allows for precise non-shifting action, and a handy quick‑release operator lever allowing for the instant release of the clamping pressure.

 

TRIPLE-TELESCOPING NESTED SWING ARM DESIGN: Unlike traditional two-post lift arms, 10AP arms retract shorter and extend farther. The innovative three-stage arms achieve more telescoping movement due to their patented nesting feature that results in greater retraction and farther reach. Inner sliding arm movement is no longer impeded by arm end plates, tube closeouts, or even the arm pivot pin itself. The inner tubes retract fully through the back of the arm assembly end even beyond the arm pin, resulting in more achievable retraction and extension.​

 

LOW PROFILE ARMS: BendPak's Low-Pro swing arms feature telescoping channels that have a shorter profile and a dropped-end pad receiver resulting in better serviceability on lowered chassis-height vehicles. They access hard-to-reach lift points with less hindrance providing increased versatility and less chance of damage to vehicle side skirts, running boards or ground effects. Varying height stackable adapters combined with two stage spin-up screw pads provide greater vertical pad placement for precise and safe vehicle support. 

 

SCREW PADS AND ADAPTERS THAT ADJUST TO YOUR NEEDS: Double-telescoping screw adapters feature gouge and tear-resistant polyurethane pads that can be screwed up or down to ensure level lifting in all conditions. Provides more precise and secure frame engagement, ensuring technician safety. 2.5" and 5" stackable adapters that are available as optional accessories provide greater vertical pad placement for precise and safe vehicle support. The drop-in design allows for quick and easy use, and 2 column mounted racks keep the adapters neatly organized and secure. 

 

INNOVATIVE SAFETY LOCK SYSTEM:

The automatic safety lock system is designed to dramatically improve operator efficiency and safety. A simple yet innovative design ensures automatic safety lock engagement during all lift rising operations, and an ergonomic single-point release allows operators to effortlessly release the safety locks during lift descent

 

BI-METRIC SWING ARMS: Exclusive Bi-Metric adaptable swing arms give users the ability to set their lift up in either symmetric or asymmetric configurations. The 2-in-1 design gives operators the option of loading vehicles either symmetrically (centerline of vehicle at column) or asymmetrically (centerline of vehicle behind column). By not having to switch out arms, you’ll be able to service vehicles faster than ever before.​

 

Spicifications:

 

   -Lifting Capacity:

      10,000 lbs. (4,536 kg)

 

   -Rise:

      -Rise: 69" (1,753 mm)

      -Rise + Pad: 72.25" (1,835 mm)

      -Time to Full Rise : 41 seconds 10AP has been bolstered to withstand elevated pushing and pulling forces that occur when vehicles are being serviced. Swing arm restraints have been used for decades on two-post lifts to minimize the chance of arms shifting during vehicle loading and service.

 

    -Outside dimensions:

      -Height Overall: 145 " (3,683 mm)

      -Width Overall: 135" (3,429 mm) or 145" (3,683 mm)

      -Outside Columns: 127" (3,238 mm) or 137" (3,480 mm)

 

   -inside dimensions:

      -Inside Columns: 108.25" (2,750 mm) or 118.25" (3,004 mm)

      -Drive-Thru Clearance: 92" (2,337 mm) or 102" (2,591 mm)

      -Floor to overhead switch: 139.25" (3,537 mm)

 

   -Arms & pads:

   -Front arm reach (MIN): 22" (559 mm)

   -Front arm reach (MAX): 47.5" (1,207 mm)

   -Rear arm reach (MIN): 29.5" (749 mm)

   -Rear arm reach (MAX): 57" (1,449 mm)

  

   -Max load per arm:

      2,500 lbs. (1,134 kg)

 

   -noise:

      <70 dB

 

   -Shipping Dimensions:

      150" x 24" x 28" (3810mm x 610mm x 711mm)

 

   -Weight:

      1729 Lbs.

 

 

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov

 

Bendpak 10AP

SKU: 5175304
$5,795.00Price
bottom of page