top of page



The XPR-12CL-LTA allows you to reach even the longest, most difficult wheelbases in the industry with three-stage telescoping lift arms with a 72” maximum range. extending even further than the 58” on our standard XPR-12CL two-post making this lift is the perfect companion for any commercial garage.


The XPR-12CL-LTA is ALI Certified: The Automotive Lift Institute (ALI) is the golden standard of automotive lift safety. With their ANSI accreditation, ALI is the only nationally recognized institute for lift certification. An ALI Certification assures you that the automotive lift in your garage meets with the quality and safety standards developed by ALI over the last 74 years of its operation. A lift that is ALI Certified had to meet with rigorous safety standards to determine the safety of its structural integrity, design, components, manual instruction and production facility.


Optional column extension: Increase your overhead clearance to 1​92​".


Triple-telescoping arm set: Three-stage front and three-stage rear arms provide greater maximum reach, as well as superior minimum retraction.


Low-profile, dropped-end frame contact pads: Despite the higher lift capacity, the XPR-12CL-LTA makes it just as easy to get under your low-profile.


Automatic arm restraints: When the lifting arms rise, arm restraints automatically engage even the largest vehicle. When the lift descends, the restraints release.


Taller lift carriages: 1​70​" lift columns built tall in order to reduce the load stress placed on each column. .


Dual Direct-Drive technology: Utilizing two, low-pressure HVLP direct-drive cylinders, BendPak eliminated the need for lifting chains or screw mechanisms commonly found on other lift designs offering better reliability, smoother operation and less maintenance.


High-speed hydraulics: Free-flow, high-pressure 3/8" hydraulic lines, a high-flow pump and integrated AC power-unit increase ascent and descent speeds for enhanced productivity.


Industrial-grade hydraulic cylinders: Integrated into every hydraulic cylinder is a one-piece, pilot-fitted, machined steel piston that is wrapped with specially designed, pressure-loaded U-cup piston seals, backups and wear bands that virtually eliminate any fluid bypass. The micro-smooth chrome-rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001".





   -Lifting Capacity:

      12,000 lbs. (5,443 kg)



      (A) Rise: 69" (1,753 mm)

      (B) Rise + Pad: 74.75" (1,899 mm)

      (C) Rise + Pad + Adapter: 80" (2,032 mm)

      (D) Min Height + Pad: 6.5" (165 mm)

      Time to Full Rise: 45 seconds


   -Outside dimensions:

      (E) Height Overall: 169" (4,293 mm)

      (F) Width Overall: 155" (3,937 mm)

      (G) Outside Columns: 142.5" (3,620 mm)


   -Inside dimensions:

      (H) Inside Columns: 119.5" (3,035 mm)

      (I) Drive-Thru Clearance: 104.75" (2,661 mm)

      (J) Floor to overhead switch: 163" (4,140 mm)


   -Arms & pads:

      (K) Front arm reach (MIN): 35.5" (902 mm)

      (K) Front arm reach (MAX): 71.5" (1,816 mm)

      (L) Rear arm reach (MIN): 35.5" (902 mm)

      (L) Rear arm reach (MAX): 71.5" (1,816 mm)

      Max load per arm: 3,000 lbs. (1,361 kg)

      Noise: 45 dB



      Shipping Dimensions: 174" x 29" x 35"

      Weight: 2,712 lb.





  • Padded overhead safety shutoff bar
  • Extended height top-beam provides greater overhead clearance
  • Single-point safety release
  • Dual direct-drive hydraulic cylinders
  • Dual-synchro equalization system for equal lifting
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Oversized A36 steel base plates
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Plated arm restraints and arm pins for rust prevention
  • Heavy-duty 1/2" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • Durable, rubber lift pads with stackable adapters
  • 16-piece specialty adapter set includes four 6" stackable adapters, four 3" stackable adapters, four polyurethane contact pads and four frame cradle pads
  • Convenient storage is included for truck and van adapters
  • Long-reach triple-telescoping arms provide increased range for lifting point access


WARNING: cancer and reproductive harm -

Bendpak XPR-12CL-LTA

    bottom of page