Description:
 
40,000 lbs. take a lot of muscle to lift and many vehicles of this caliber are longer than standard-length series four-post lifts can accommodate. Be prepared for the longest and heaviest vehicles on the road, you need BendPak's most impressive lift and this is it. With runways that measure in at a whopping 310”, the HDS-40X is the heaviest-duty extended-length car lift BendPak makes. Military contractors, government entities and large commercial truck repair companies have all sought this lift out, knowing there's nothing that it can't handle.
 
Super-long runways: At 28" wide, these runways accommodate tires of virtually any diameter and width.
 
Dual-hub cable sheaves: BendPak cable sheaves are made to dominate every lifting application, however big or small. 12" diameter sheave bodies and 4" axles make them far more likely to last the lifespan of your lift because of their sheer size and quality of construction.
 
Large base plates: 12 x 12 plate dimensions are extremely secure for maximum stability and lifting longevity.
 
Spring-loaded safety locks: 13 lock positions offer up to 60" of rise for comfortable undercarriage access. All locks automatically engage during rise and disengage at the touch of a button.
 
Secondary lock system: Backup cable-slack detection system that captures loose cables immediately if slack develops. This system makes it entirely safe to remedy any issues without risking uneven platforms.
 
Rolling bridge jacks: Perform wheel service on your fleet with a pair of RBJ25000 bridge jacks and start working. Together, two jacks will lift a vehicle up to 50,000 lbs., but keep in mind the HDS-40X has a 40,000-lb. limit. The extra 10K is not just peace-of-mind, but a practical consideration since the front half of most trucks (where the engine and transmission rest) is likely to be heavier than the back
 
 
Specifications:
 
   -Capacity:
      Lifting Capacity: 40,000 lbs. (18,144 kg)
      Max Capacity / Front Axle: 20,000 lbs. (9,072 kg)
      Max Capacity / Rear Axle: 20,000 lbs. (9,072 kg)
 
   -Rise:
      (A) - Min. Runway Height: 9.5" (241 mm)
      (B) - Max. Rise: 60" (1,524 mm)
      (C) - Max. Lifting Height: 67" (1,702 mm)
      Time to Full Rise: 75 seconds
 
   -Outside Dimensions:
      (D) - Overall Width: 153.5" (3,899 mm)
      (E) - Outside Length: 317" (8,052 mm)
      (F) - Overall Length: 373.75" (9,487 mm)
      (G) - Height of Columns: 91.25" (2,318 mm)
 
   -Inside Dimensions:
      (H) - Width Between Columns: 133.5" (3,391 mm)
      (I) - Drive-Thru Clearance: 109" (2,769 mm)
 
   -Runways:
      (J) - Runway Width: 28" (711 mm)
      (K) - Length of Runways: 316" (8,026 mm)
      (L) - Width Between Runways: 40.75" (1,038 mm)
      (M) - Runway Centerline: 74" (1,880 mm)
      (N) - Outside Edge of Runways: 102" (2,592 mm)
 
   -Minimum Wheelbase:
      Rated Capacity: 230" (5,842 mm)
      75% Capacity: 195" (4,953 mm)
      50% Capacity: 165" (4,191 mm)
      25% Capacity: 130" (3,302 mm)
 
   -Locking:
      Locking Positions: 13
      Lock Spacing: Every 4" (100 mm)
 
   -Power Unit:
      Motor: 220 VAC / 60 Hz. 1Ph.
      Noise: 45 dB
 
   -Shipping:
      Weight: 6,748-lbs. (3,060 kg)
      Dimensions: 266'' x 33'' x 37'' (6,756 mm x 838 mm x 940 mm)
 
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
 
40,000-lb. lifting capacity
Supersized 12" diameter cable sheaves
Galvanized lifting cables
Extended length runways
Grease nipples
Single hydraulic under-runway cylinder
Integrated flow restrictor
Spring-loaded safety locks
Second lock system on constant guard
Fully enclosed lifting cables
Multiple adjustable height locking positions
Maintenance-free electric hydraulic power system
Conveniently positioned operator controls
12" x 12" base plates
Runways feature a durable matte finish
Optional rolling jacks
 
WARNING: cancer and reproductive harm - www.P65Warnings.ca.gov